Item #: J58
Our Price: $2.29
In Stock, Will Ship On 06/03/2020.


Pure food grade platinum cured silicone tubing can withstand temperatures of 350 degrees F. More flexible than thermoplastic tubing, and a bit easier to see through.  Ideal for piping hot wort into wort chillers. This tubing is 1/2" in interior diameter, and has a 3/4" exterior diameter.  Maximum pressure 5 psi, so this tubing is not for use in pressurized setups, like draft beer dispensing.

FDA compliant for food applications, 3-A certified to Sanitary Standards, BPA and Phthalate free, made in USA.

Sold per foot, when you enter a quantity of 5, for example, you will get one five foot length.


Average Rating:
(based on 13 reviews)

Showing 1 - 5 of 13 Reviews:

Review and Rate this Item
by JC
on 5/10/2020
from Los Angeles
ID is not 1/2"
As other reviewers noted, the ID of this hose is slightly larger than 1/2" and doesn't fit as snugly as other tubing. I like the quality of this tubing to the standard opaque tubing otherwise. 
by John Devillier
on 4/9/2020
from Baton Rouge
ID larger than your 1/2 in Vinyl
I purchased 1/2 inch vinyl tubing and 1/2 inch Silicone tubing from Williams.  The 1/2 inch vinyl tubing fits my half inch hose barb snugly - no leaks.  Unfortunately, the 1/2 inch silicone tubing is loose, and leaks.  I agree with reviewer Bryan.  Try comparing the 2 tubings by attaching each of them to the same 1/2 inch hose barb.  I expect that you will see the difference.
by Clyde Knight
on 4/5/2018
from Longview, TX
Excellent Quality Tubing
Purchased both 3/8" and 1/2" tubing for my all grain system. The quality of the tubing is excellent and it is easy to work with. I had quick disconnects to my tubing for easier setup and cleaning. I highly recommend this tubing.
by PJ
on 10/30/2016
from Las Vegas
Why use anything else?
This stuff is beautiful! I can't believe I ever fooled around with vinyl tubing...or for that matter thermoplastic tubing. This tubing is extremely flexible as well as heat resistant. It easily connects to hose barbs. I will NEVER use anything else! This stuff is the BEST!
by Bryan
on 6/3/2016
from WI
Not Quite The Same
The ID is slightly larger than 1/2" resulting in a very loose fit on my 1/2" hose barbs.  I'll stick with my platinum cured silicone tubing from my other source since the price is the same and the quality is far better.

William's Brewing Responds:  We have measured our tubing with a caliper and it is exactly 1/2" in interior diameter. It is also platinum cured. Can you measure your hose barb?  Thanks!
Review and Rate this Item
4/9/2018 12:51:09 PM
Is this suitable for using with the pumps in an E-HERMS system?
Yes, although it gets soft when it gets hot, and will expand if the PSI is over 3 or 4. You might also check out our heavy wall Thermoplastic Tubing, as it is more rigid when hot.
8/22/2017 6:40:09 AM
Hi, Is this NSF51 certified? Is there a product datasheet I can refer to? Cheers
It is not NSF51 certified, but it is 3-A Certified compliant to sanitary standards for food contact.
Ask a Question

    Email A Friend

    Send this product to a friend...