Item #: J52
Our Price: $1.99
Low Inventory - Only 2 In Stock, Will Ship On: 01/23/2020.


This Thermoplastic tubing can withstand temperatures of 275 degrees F., and is food grade. Ideal for piping wort into wort chillers. This tubing is 1/2" in interior diameter, and 5/8" in exterior diameter (3/32" wall).  Order this heavier wall tubing if you plan to use a pump (it also works for gravity feed). This is the tubing at the left in the above picture.

Sold per foot, when you enter a quantity of 5, for example, you will get one five foot length.


Average Rating:
(based on 3 reviews)

Showing 3 Reviews:

Review and Rate this Item
by Alan
on 1/23/2016
from Naples
Great Product
I use this to transfer hot wort from my boil kettle to my chiller, and then to the carboy. Works great!!!
by eyeintheworld
on 1/20/2012
from Oakland, CA
Works great for steam injection
I use this tubing connected to a 22 qt pressure cooker to inject steam through a 1/2 in copper pipe manifold into my 10 gal round Igloo cooler mash tun. It works great for steam injection because it's durable, and thicker than the normal vinyl tubing.

As stated in another review, the disadvantage in using this for other purposes, like transferring wort, is that it's not clear, so it's harder to tell if you have flow issues. Other than that, highly recommended, as a durable, high temp, multi-use tubing.
by J.H.
on 7/29/2008
Thermoplastic Tubing
Pros: Withstands boiling temps.  Soft enough to easily get on and off barb fittings.  Durable (I have used mine over and over and cycle PBW through it to clean the insides.)  Better than hardware store vinyl.  Cheaper than silicone. 

Cons: Will kink if you try to make a tight bend, but not an issue if you plan out the placement of kettles, pumps, etc. Cannot see inside.
Review and Rate this Item
Be the first to submit a question on this product!
Ask a Question

    Email A Friend

    Send this product to a friend...