• 0-30 PSI Flare Mount Keg Mini Regulator

click on thumbnail to zoom
Item #: D58
Our Price: $69.99
Low Inventory - Only 1 In Stock, Will Ship On: 11/18/2019.
  74 Gram Brewer's Edge® CO2 Cartridge (No Air Shipment) (+ $9.99)


Take your beer with you when you go to the beach, camping, a game, or to a party. This 0-30 PSI regulator fits any threaded ball or pin lock gas connector (connector not included), for quick attachment to you keg.

Our Ball Lock Mini Regulator takes 74 gram Brewer's Edge C02 cartridges, which hold enough gas to dispense a carbonated 5 gallon ball-lock keg.  It features a inline stainless check valve between the regulator and the ball lock fitting to protect it from backflowing beer. With this 0-30 PSI model, you can both dispense and force carbonate. Features a 1/4" female beverage flare outlet, to fit standard ball and pin lock keg gas connectors.

This also fits stainless ball lock gas connectors, and our Ultimate Growler, although you will also need our tapered nylon washer (item D87) to seal the metal-to-metal gas connection with these.

The flared outlet on the side that goes to the stainless ball lock fitting can be unscrewed and leaves a 1/8" female NPT port. Into this port you can screw any 1/8" NPT male thread hose barb or threaded outlet (such as our item I80). 

The regulator does not include a pictured cartridge, you will be offered a chance to order these when you put this in your cart. Note that C02 cartridges cannot be shipped by air or express, and cannot be shipped outside the lower 48 states due to aviation and postal regulations.

FOR C02 ONLY: This regulator is designed for use with C02 only, and should not be used with higher pressure argon or nitrogen gas.


Average Rating:
(based on 1 review)

Showing 1 Review:

Review and Rate this Item
by norden
on 4/21/2017
from arizona
handy little reg.
I use this on a 1 3/4 gall. keg.  a must have and is very handy.. ordered the Brewers Edge reg. as the original no-name reg I first got (different vendor) crapped out... this one is working just FINE!!!
Review and Rate this Item
12/10/2017 10:52:34 PM
Can this be used with a nitrogen cartridge?
No, it is designed for C02 only,
8/23/2017 10:13:27 AM
Does this have an adapter that can be removed that allows use of a paintball tank, or is there an adapter that can be added to use with a paintball tank?
No, this only works with 16 and 74 gram threaded C02 Cartridges.
8/9/2017 3:52:24 PM
How accurate is this regulator? Is it as accurate as the micro version The pressure gauge informs you of the pressure in the keg and not the amount left in the CO2 tank? What is the difference between this regulator and the micro brewers edge regulator
Pretty much the same mechanism inside this regulator as inside our Brewer's Edge Micro Regulators, so just as accurate. The pressure gauge informs you of the dispensing pressure, the amount of pressure in the keg only.
4/21/2017 3:08:30 PM
are there repair parts available for the mini-regulator or is factory repair available?
We have replacement washers and burst disc repair kits.
Ask a Question

    Email A Friend

    Send this product to a friend...