If you have a kegerator that dispenses a commercial beer keg, with a 5/16" inner diameter gas line and 3/16" or 1/4" inner diameter beer out line, this kit includes everything you need to convert it to dispense ball lock home brew kegs. What you do is first cut off the existing wing nut and nipple from your gas and beer hose at your existing sanke tap, and fit threaded fittings to them so they can easily switch between the included threaded ball lock fittings, and your newly threaded sanke tap (sanke tap threaded conversion fittings included).
Once you convert your kegerator with this kit, you can easily change from your Sanke commercial beer tap to ball lock fittings for homebrew in about 3 minutes. Switch back and forth without having to cut any lines, or pry hoses off of stubborn hose barbs. Includes our complete, step by step, photo-illustrated instructions.
Note: This fits all Sanke heads sold by William's Brewing and most other Sanke heads, with the exception of the low profile Sanke head sold by some other suppliers. This low profile head has inlets and outlets that come out horizontally on the sides of the coupling head, instead of having a beer fitting on the top and a gas fitting on the side like the standard Sanke couplng head.