|
The Tap-A-Draft is an economical and space saving portable beer dispensing system.
Three 6 liter PET bottles hold 4.75 gallons of beer,
virtually all of a 5 gallon batch.
The Tap-A-Draft
features a 6 liter BPA-free PET bottle, which screws onto the tapping
unit for dispensing. The tapping unit holds two eight gram C02 cartridges, and features a
preset regulator that dispenses the C02 from the two cartridges into the bottle at an even rate,
so you can leave the unit for a month or two, and still dispense
all the beer with the two eight gram cartridges (also used for seltzer
bottles).
When brewing beer for the Tap-A-Draft, prime the beer first by
using 3 ounces of corn sugar per 5 gallon batch (about half a cup). Then fill
the bottles and seal with the included 38mm screw caps. Let age like bottled
beer until they are carbonated (this system will not artficially carbonate beer
by C02 injection). To serve, remove the cap and screw on the Tap-A-Draft tapping
head, insert two 8 gram C02 cartridges into the unit, chill and dispense.
Two eight gram C02 cartridges will dispense the entire 6
liters of beer, and the built in regulator will keep pressure steady for up to
two months. The 6 liter pet bottles are usable until they become damaged,
usually for at least 6 batches. The pet bottles will keep beer fresh for 4
months. For longer beer storage, look to our Mini
Keg Systems or full-sized Beverage systems. You will need 6 cartridges to dispense three
bottles (4.75 gallons). A portable space-saving draft system at a great price
Includes the Tap-A-Draft tap, drip tray, 10 eight gram
C02 cartridges, and 3 six liter pet plastic bottles (with 3 caps). Everything you
need to bottle and dispense 4.75 gallons of beer. The assembled unit with bottle and tap is 17"
long, and 6" in diameter. The sealed bottles themselves are 14.5" long, and
6" in diameter.
RESTRICTED SHIPPING- No shipments
to Alaska, Hawaii, U.S. Possessions, or Military addresses, and ground shipment
only to the lower 48 states.
|
